We have found a summary of the most prevalent shapes of carbide burrs:
Cylinder end-cut shape
Cylinder end-cut shape contains a flat end and it is helpful for implementing materials which have right angles in addition to eliminating features. While completing contours on materials, a favorite solid carbide burr. Flat surfaces are taken out of nearly all materials. Carbide cylindrical form end cut burs may be used for either end or side cutting because of the versatile nature. Deburring and polishing flat bottom holes and slots are two common applications for the kids.
Cone shape
Deburring gear teeth, heat exchanger fan blades, inner bevel edges, and internal pipe edges are some of the applications which is why cone-shaped carbide burrs are developed. The exact same function as a countersink, as well as chamfers inside holes on purpose.
Taper shape
The removal of round features from a workpiece produces a product that is much more seamless. A practical instrument that is able to access restricted locations and machine material surfaces
Flame shape
When cutting materials with round edges, utilize a carbide burr the same shape as a flame. The flame way of carbide burrs is supposed to use in deburring and polishing elliptic surfaces on steel dies, forgings, castings, and metal patterns.
Tree shape
just like a tree in look but with a clear, crisp tip at the pinnacle. The round edges are ground by way of a group of carbide burrs in succession. This kind can help you easily access lengthy, tight locations that are inaccessible using the majority of the other shapes. Deburring and completing the deep contoured surfaces of steel dies, moulds, and metal patterns would be the primary functions that Tree Shape carbide burrs are designed to do. Like be utilized to restore damaged places on dies that have been brought on by slugs.
Oval shape
While you carry on and focus on your project, this perfect carbide burr efficiently clears round edges on the workpiece that’s been handed for you. Oval-shaped carbide burs can be used deburring and polishing curved surfaces in steel dies, forgings, castings, and metal patterns. These burs are constructed with an oval cross-section. They are utilized to the process of treating difficult fillet welds.
Ball shape
Carbide Deburring round bottom holes, curved slots, and curved metal and material surfaces are the applications which is why ball-shaped burs were devised. In addition to that, you may use these phones widen or lengthen microscopic holes to be able to treat hard fillet welds. The sleek machining of all round edges of workpieces, as well as the preparation of workpieces for brazing, is done possible through the ball shape.
More info about SB-9 Carbide Burrs check this website