SA-3 cylinder shape burrs are perfect for interior contour work and deburring. Due to extreme hardness on this tungsten carbide, it can be used on far more demanding jobs than HSS (High-Speed Steel).
Double cut or Cross cut carbide burrs tend to be utilized on ferrous and non-ferrous metals, soft steel, and also for all non-metal materials including stone, plastics, wood, and ceramic. Double cut burrs leaves a somewhat smoother finish than single cut on account of producing smaller chips because they cut away the fabric. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is easily the most popular cut and definately will see you through most applications.
Machines Utilized on:
Die Grinders and hand-held pneumatic grinders
Application:
Ferrous Materials – Cast Iron, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Other Materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are ideal for interior contour work like peripheral and face milling.
Safety Tips & Techniques:
Tool speed is decided by the material you use your burr on. If you might be experiencing chipping, you’re operating at too much of speed for that application. Start with a slower speed and increase on the way and soon you achieve the greatest results
Apply light pressure and allow tool perform the work. Bearing recorded on the tool will lead to reduced tool life plus a dull burr.
Always wear proper PPE to feature (although not limited to) safety glasses, hearing protection, respirator, and safety gloves. Keep all guards in position on your own machine.
Avoid experience electrical energy drills; the slower speeds can result in chipping of one’s workpiece.
To read more about SA-3 Carbide Burrs check this useful webpage