Carbide burrs are tools used for deburring most hard materials like ceramics, stone, steel, aluminum, plastics and hardwood. They provide precision, and may double in cutting, shaping, grinding and chamfering hard materials.
Carbide burrs may be used with a number of materials including metals (including Steel aluminum and cast iron) and varieties of wood. You can use it on acrylics, fiberglass and plastics too. Carbide burrs can last for quite a while without chipping or breaking in order that it’s so good to utilize them on soft metals like gold,platinum and silver.
Which are the Benefits of Carbide Burrs Weighed against HSS Burrs?
In contrast to HSS, Carbide Burrs are much harder.
The Tungsten Carbide is extremely hard in order to be used in wider range of work than HSS (High Speed Steel).
HSS can’t perform as well as carbide burrs when they are at temperature. Carbide Burrs can bear hotness and may run longer time.
Carbide won’t soften at hot temperature but HSS burrs is opposite. There is no doubt that carbide is the perfect choice.
Utilizing Carbide Burs:
For more stability, insert the accessory bit into the unit and then back out slightly before tightening around the collet nut or keyless chuck.
Do not use these for drilling holes or enlarging holes that are lower than twice the diameter with the cutter. The tungsten carbide surface can certainly catch the medial side of a hole and break the part.
Use higher speeds for hardwoods, slower speeds for metals and slow speeds for plastics (to avoid melting at contact point).
Start with a lower speed. Then increase for the speed that provides the most favourable results.
Do not apply excessive pressure. It can slow down the spindle and chip cutting edges. Just let the bur carry out the cutting.
Utilize the sides with the cutter for effective cutting. The end cuts poorly which enable it to break pressurized.
Never in-capsulate the bur in the cut. If chattering occurs, increase speed.
When utilizing aluminium and magnesium, consider some sort of lubricant, wax or tallow, as it may help avoid the flutes from loading or packing.
Carbide burs, if used the right way, will outperform HSS burs by 50
For details about SD-51 Carbide Burrs go to this useful web page