Use tungsten carbide burrs on hard materials including steel, aluminum and iron, all types of stone, ceramic, porcelain, wood, acrylics, fibreglass and reinforced plastics. When applied to soft metals including gold, platinum and silver, carbide burrs are great while they can last for years without any breaking or chipping.
Different cuts of carbide burrs will probably be suitable for certain materials.
Uses of SB-3 Carbide Burr Die Grinder Bit
Use carbide burrs in air tools for example die grinders, pneumatic rotary tools and high speed engravers. Micro Motors, Pendant Drills, Flexible Shafts, and hobby rotary tools like a Dremel.
Carbide burrs are trusted for metalworking, tool making, engineering, model engineering, wood carving, making jewelry, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting. Carbide burrs are utilized from the aerospace, automotive, dentistry, stone and metalsmith industries.
What SB-3 Carbide Burr cut should you choose?
Single cut (one flute) carbide burrs have a very right handed (up cut) spiral flute. Single cut is employed with stainless steel, hardened steel, copper, surefire and ferrous metals and will remove material quickly using a smooth finish. Use for heavy stock removal, milling, deburring and cleaning.
Heavy removing material
Milling
Deburring
Cleaning
Creates long chips
Use double cut carbide burrs on ferrous and non ferrous metals, aluminium, soft steel and for all non-metal materials such as stone, plastics, wood floor and ceramic. This cut has more cutting edges and may remove material faster. Double cut also known as Diamond Cut or Cross Cut (2 flutes cut across each other) and will leave a smoother finish than single cut on account of producing smaller chips as they cut away the information. Use double cut for medium-light stock removal, deburring, finishing and cleaning. Double cut carbide burrs are hottest and help most applications.
Medium- light removing material
Deburring
Fine finishing
Cleaning
Smooth finish
Creates small chips
What SB-3 Carbide Burr RPM speed if you work with?
The rate of which you utilize your carbide burr within your rotary tool is dependent upon the information you’re making use of it on along with the contour being produced but it’s safe to say you do not need greater than 35,000 RPM. In the event the burs are chipping easily this can be due to speed being too slow. It’s ideal to start out the bur off slow, enhancing the speed as you go along. High speeds minimizes clogging within the flutes of your respective carbide burs.
As with all drill bits and burrs, allow the burr carry out the work and apply simply a little pressure, otherwise the cutting edges from the flutes will chip away or become smooth too soon, minimizing the time of your burr.
More information about SB-3 Carbide Burrs check out this useful webpage