Use tungsten carbide burrs on hard materials including steel, aluminum and iron, all types of stone, ceramic, porcelain, wood, acrylics, fibreglass and reinforced plastics. When utilized on soft metals like gold, platinum and silver, carbide burrs are fantastic while they will last for a long period without breaking or chipping.
Different cuts of carbide burrs will probably be suitable for many materials.
Ways to use SB-3 Carbide Burr Die Grinder Bit
Use carbide burrs in air tools such as die grinders, pneumatic rotary tools and high speed engravers. Micro Motors, Pendant Drills, Flexible Shafts, and hobby rotary tools for instance a Dremel.
Carbide burrs are widely used for metalworking, tool making, engineering, model engineering, wood carving, jewelry making, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting. Carbide burrs are widely-used from the aerospace, automotive, dentistry, stone and metalsmith industries.
What SB-3 Carbide Burr cut if you choose?
Single cut (one flute) carbide burrs have a very right handed (up cut) spiral flute. Single cut is utilized with stainless, hardened steel, copper, iron and ferrous metals and may remove material quickly with a smooth finish. Use for heavy stock removal, milling, deburring and cleaning.
Heavy removal of material
Milling
Deburring
Cleaning
Creates long chips
Use double cut carbide burrs on ferrous and non ferrous metals, aluminium, soft steel as well as for all non-metal materials like stone, plastics, wood and ceramic. This cut has more cutting edges and can remove material faster. Double cut also known as Diamond Cut or Cross Cut (2 flutes cut across the other person) and definately will leave a smoother finish than single cut on account of producing smaller chips as they cut away the fabric. Use double cut for medium-light stock removal, deburring, finishing and cleaning. Double cut carbide burrs are most popular and help most applications.
Medium- light removal of material
Deburring
Fine finishing
Cleaning
Smooth finish
Creates small chips
What SB-3 Carbide Burr RPM speed if you work with?
The pace of which you utilize your carbide burr within your rotary tool is determined by the pad you’re deploying it on and also the contour being produced but it’s safe to assume you don’t need over 35,000 RPM. If the burs are chipping easily this could be as a result of speed being not quick enough. It’s ideal to begin the bur off slow, helping the speed as you go along. High speeds minimizes clogging within the flutes of your carbide burs.
As with most drill bits and burrs, permit the burr carry out the work and apply merely a little pressure, otherwise the cutting edges from the flutes will chip away or become smooth too quickly, reducing the lifetime of your burr.
For more information about SB-3 Carbide Burrs see this popular web portal