The Butt and Pass Method

The Butt and Pass Method is certainly (and I mean with a really long way) the best method for constructing a REAL log home.


I am should you have came by because you have did start to shop around for information on how far better to build a cottage / home. Well I’m hoping the info you see on my website answers your queries and if not have you thought to ask me, I’d be happy to answer any question you could have on constructing a cottage and particularly for the butt and pass method.

The Butt and Pass technique is the best as well as the smallest amount of maintenance

People in today’s world have the necessary craftsmanship background nor the requisite length of time it takes to master traditional scribing and notching. Fortunately you do not have to turn into a master craftsman in order to build a very high-quality log structure in relatively almost no time.

Today there are inexpensive materials accessible that greatly simplify the entire process of log home building so you can placed a home with hardly any with respect to skill, time, or money. Logs are peeled, sometimes dried, cut to length, hauled into place, then drilled and pinned. Using the butt and pass, you use a large electric drill, lots of cheap reinforcing bar (also known as “rebar”), as well as a sledge hammer to pin the logs together with essentially no scribing, no notching, with no close fitting. The last method is stronger and much more stable than the usual scribed and notched log home.

A login one wall butts up against a login one other wall, overlapping like brickwork inside the corners. The logs are held together with rebar pins, drilled and nailed through from one log to a higher, in the corners every two feet along each log. The butt and pass method doesn’t have vulnerable notches for rot to create in, and all the logs are extremely tightly pinned together with rebar that there are no settling. The window and door frames could be nailed directly to the logs without worry. Space between the logs is insulated with strips of fiberglass insulation, then covered with sand and cement chinking mortar.

Besides being fast, durable, and economical, the butt and pass approach to log home building requires relatively few tools. The truth is, a lot of the necessary tools would fit into the back of an car! And although big house logs might be heavy, you can actually lift them into place with out a crane. Which has a block and tackle pulley system mounted on a lifting pole at intervals of corner of the house, you can actually wrap a strap around a log and hoist it to the air, either by hand, or by attaching the haul rope into a truck. Drive backwards slowly as well as the log floats into place.

When built correctly, a butt and pass log home can outlive any other type of log house, and it doesn’t require endless coats of stain or another sealants to shield the logs from decay.
To learn more about butt and pass view this useful net page: read more

Bookmark the permalink.

Leave a Reply