The lathe machine tool shapes a physical object by cutting, sanding, drilling or formation with tool by rotating the object on its axis. Generally a lathe machine is used to present contour around workpieces and contains many parts. Many are feed service lever, back gear level, head stock, face plate, tool post, compound rest, saddle, clutch knob and half nut lever. Just about every section of the machine is very important and performs very complicated functions. The one who operates the device is named turner. It fully is determined by the knowledgeable turner to do a good job which demands huge degree of attention.
There are numerous types of horizontal band saw which can be utilized for working with wood, metal working, glass working, metal spinning, ornamental turning, shaping, rotary & watchmaking. All sorts of lathe is used for particular function. By way of example, a steel workshop uses metal working lathes & a carpentry workshop uses working with wood ones. A Lathe machine may be used to shape different objects. Besides, a great round bar could be shaped into a bolt by causing specific thread. Technology-not only for complicated drilling where it is difficult in the general drilling machine which enable it to drill at specific angles by setting degrees.
Boring is the another function of lathe utilized to produce holes in the object. It may cut 6 inches of hole easily by using sharp tools. There’s 2 types of tools mostly utilized for cutting solid material like M.S. cutting tool & diamond cutting tool. These kinds of tools can be used fine tuning a physical object. The lathe object is used to sharpen is an alloy which is formed with the addition of some materials to harden it. Lathing concept has been formed since 1300(B.C) for this. During this period it had evolved for different functions especially in mechanical works, carpentry works, glass works and steel fabrication where it’s contribution has been very important.